如何制作风筝英语作文初三的

作者:艾德琳
作者:用户投稿
发布时间:2021-01-04 04:27:03 阅读:1103 点赞:37

如何制作风筝英语作文初三的

关于”如何制作风筝“英语作文范文3篇,作文题目:How to make kites。以下是关于如何制作风筝专八英语范文,每篇作文均为真题范文带翻译。

高分英语作文1:How to make kites

Spng is coming. This is a good season that ryone likes. Spng likes a betiful girl and the wind blows gently.

I like spng very much becse there are many sports to do in spng, such as flying kites. It's always interesting to do this, which is also my favote sport. But first of all, we must make a kite.

Maybe it's very difficult for us, but don't worry, we It can be done by o fends or parents. This year, my fend and I made a kite, but first I didn't know how to do it. Then I asked my parents how to do it.

My father told me that you can find the answer on the Internet. I found the answer on it. So I quickly made a kite with my fend.

I was very happy becse I did QQ.

中文翻译:

春天来了,这是一个大家都喜欢好季节春天喜欢一个漂亮女孩,风温和地吹我非常喜欢春天,因为春天有很多运动可以做,比如放风筝,做这个总是很有趣,这也是我最喜欢运动,但是首先,我们必须做一个风筝,也许这对我们来说很难,但别担心,我们可以由我们朋友或父母来做。今年,我和我朋友做了一个风筝,但是首先我不知道怎么做,我问我父母怎么做,我告诉我你可以在网上找到答案,我在上面找到了答案,所以我很快就和我朋友做了一个风筝,我很高兴因为我做了QQQ。

万能作文模板2:怎样做风筝

The pcede for a kite is to cut o lens of dowel bars, one inch long and the other inch long. Mease each cut with a ruler. Mark the shorter inch part at half of its len and mark the longer inch part at one third of its len.

The o poles are at ght angles, one on top of the other, so that the marks touch the o poles. Form a css shaped step with a stng stng. Tie the o ds together, tie a safe knot at their meeting, and cut off the redundant pe step.

Use a utility knife to cut a all cut at the end of the o ds. These notches will hold the pe that gives the kite a shaped step. Put some line in the slot at the top of the kite rack.

When the pe is fixed on the top of the kite pole, wrap it aund the top of the pole step and tightly aund the edge of the frame. Make se that when you retn to the top of the kite rack, it is firmly installed in each slot of the pole step, and the end of the kite is tied to the shelf with a pe When cutting paper with scissors or utility knives, leave about 1 / 2 inch of excess: apply glue along the outer edge of the paper, then fold it up so that it can wrap the pe and fix it to the paper in the frame, while se that enough glue is used and nly spread over the steps that attach the paper to both the pe and itself: short Each end of the pole should be tied with a pe, the len of which should be a little longer than the step of the pole: tie another pe to both ends of the pole, and the pe should be a little longer than the step of the pole: take o pes with one hand, find their overlap in fnt of the kite, and tie them together with a little extra pe. This is the place where you should tie the kite line when you fly a kite.

To make a tail for yo kite, fix it http://wwwehowcom/howmakekitehtmlhttp ://wwwtutoalscom///asp.

中文翻译:

如何制作一个风筝步骤切割两个长度暗销杆,一英寸长,另一英寸长步骤用尺子测量每个切割部分,在其长度一半处标记较短英寸部分,并在其长度三分之一处标记较长英寸部分。两个杆呈直角,一个放在另一个上面,使标记接触到两根杆,用结实细绳形成一个十字形台阶,将两根杆绑在一起,在它们相遇处系上一个安全结,并切断多余绳子台阶使用一把实用刀在两根杆末端切出一个小切口。这些槽口将固定使风筝有形状台阶绳子把一些线放在风筝架顶部槽口中,当绳子固定在风筝杆顶部时,将其绕在杆台阶顶部,将其紧紧地绕在框架边缘,确保当你回到风筝架顶部时,它牢固地安装在杆台阶每个槽口中,把风筝末端用一根绳子绑在架子上,用剪刀或多能刀剪纸时,请留出大约1/2英寸多余部分:沿着纸张外缘涂抹胶水,将其折叠起来,这样它就可以将绳子包裹起来,并将其固定在框架内纸张上,同时确保使用足够胶水并将其均匀地摊铺到把纸同时贴在绳子和它身台阶上:在短杆每一端绑一根绳子绳子长度应该比杆台阶长一点:再把另一根绳子系在长杆两端,绳子应该比杆台阶长一点:用一只手拿起两根绳子,在风筝前面找到它们重叠地方,用一点额外绳子把它们绑在一起。

这是你在放风筝时候要系上风筝线地方。为了给你风筝做一个尾巴,固定好http://wwwehowcom/howmakekitehtmlhttp://wwwtutoalscom///asp。

满分英语范文3:如何制作风筝

Kite mateals: Bamboo (the interval beeen bamboo and bamboo must be up to the long cardboard, thread (including contl line glue, scissors) pduction: we cut the bamboo pieces flat, and then bend and shape the bamboo pieces with torches for pcessing and repaing. When binding, we should choose a flat table top. After the kite is assembled and shaped, the skeleton is ligated.

The next one is to paste colored drawings or patterns on the paper. I drew one on the paper A monkey king, my father put the monkey king's color on it, got the kite skeleton, and used glue to paint the paper with monkey king.

中文翻译:

风筝制作材料:竹(竹与竹间隔一定要直到长纸板上,线(包括控制线胶、剪刀)制作:我们将竹片剪平后再用火把将竹片弯曲成型后进行加工修补,在装订时,应选择平整桌面,把风筝拼凑成型后完成骨架结扎,下一个是在纸上粘贴彩绘或图案我在纸上画了一个孙悟空,把孙悟空颜放上去,得到风筝骨架用胶水在画上有孙悟空纸。

标签: 新学期 

本站内容均为「墨花用户」原创整理,未经授权严禁采集转载,违者必究。
评论
0 条评论